It is continuous drying equipment for mass production that suitable
for breathe-freely slicestrip or particle materialsEspecially for dehydrating vegetablesChinese drugs and catalyze materials that required low temperatureIt is featured with high speedstrong evaporate and high-qualityIt can be also used for drying paste materials which need to be
made into strip
Please see the drawing below for the working theoryThe materials in
the hopper will be feed onto the convey net evenly by the feederThe
net uses 12-60 um stainless steel and will be conveyed into the
equipment by the transmission deviceThe drying parts are composed
of many individual cycle unitsSome of the tail gas will be
discharged by humidity-discharging motor6
All the air volume will be controlled by the adjusting valve 7In
the upper cycle unitthe air comes from the blower 5 will go into
the lower cavity through the side air-wayThe stream will be heated
by the heat-exchanger and distributed by the distributor 3then it
will be spray into the convey net and go up to the upper cavity
after go through the materialsThe hot-air stream go through the
materials during the dryingon the other wordsit finishes the
transmission between heating and quality